Roving kai tsaye don naɗewar filament
Roving kai tsaye don naɗewar filament
Direct Roving don Filament Winding, ya dace da polyester mara cika, polyurethane, vinyl ester, epoxy da resins phenolic.
Siffofi
● Kyakkyawan aiki da ƙarancin fuzz
●Daidaita da tsarin resin da yawa
●Kyawawan halayen injiniya
●Cikakken ruwa da kuma fitar da ruwa cikin sauri
●Kyakkyawan juriya ga lalata acid
Aikace-aikace
Manyan amfani sun haɗa da ƙera bututun FRP masu diamita daban-daban, bututun mai mai ƙarfi don canjin mai, tasoshin matsi, tankunan ajiya, da kuma, kayan rufi kamar sandunan amfani da bututun rufi.
Jerin Samfura
| Abu | Yawan Layi | Daidaiton Guduro | Siffofi | Amfani na Ƙarshe |
| BHFW-01D | 1200,2000,2400 | EP | Dace da epoxy resin, an tsara shi don tsarin nada filament a ƙarƙashin babban tashin hankali | ana amfani da shi azaman ƙarfafawa don ƙera bututun mai mai ƙarfi don watsa mai |
| BHFW-02D | 2000 | Polyurethane | Dace da epoxy resin, an tsara shi don tsarin nada filament a ƙarƙashin babban tashin hankali | Ana amfani da shi don ƙirƙirar sandunan amfani |
| BHFW-03D | 200-9600 | UP,VE,EP | Dace da resins; Ƙananan fuzz; Babban kayan sarrafawa; Babban ƙarfin injiniya na samfurin haɗin | Ana amfani da shi wajen ƙera tankunan ajiya da bututun FRP masu matsin lamba na tsakiya don watsa ruwa da lalata sinadarai |
| BHFW-04D | 1200,2400 | EP | Kyakkyawan kadarar lantarki | Ana amfani da shi don ƙera bututun rufin da ba shi da rami |
| BHFW-05D | 200-9600 | UP,VE,EP | Mai jituwa da resins; Kyakkyawan halayen injiniya na samfurin haɗin gwiwa | Ana amfani da shi don ƙera bututun FRP na yau da kullun da tankunan ajiya masu jure matsin lamba |
| BHFW-06D | 735 | SAMA, VE, SAMA | Kyakkyawan aikin tsari; Kyakkyawan juriya ga lalata sinadarai, kamar lalata mai da iskar gas H2S da sauransu; Kyakkyawan juriya ga lalatawa | An ƙera shi don bututun roba mai ƙarfi na RTP (ƙarfafa bututun thermoplastics) wanda ke buƙatar juriyar acid da juriyar gogewa. Ya dace da amfani da shi a cikin tsarin bututun da za a iya ɗiban ruwa. |
| BHFW-07D | 300-2400 | EP | Mai jituwa da resin epoxy; Ƙaramin fuzz; An ƙera shi don tsarin naɗe filament a ƙarƙashin ƙarancin tashin hankali | ana amfani da shi azaman ƙarfafa bututun matsin lamba da bututun FRP mai juriya da matsin lamba mai ƙarfi don watsa ruwa |
| Ganowa | |||||||
| Nau'in Gilashi | E | ||||||
| Jirgin Ruwa Kai Tsaye | R | ||||||
| Diamita na filament, μm | 13 | 16 | 17 | 17 | 22 | 24 | 31 |
| Layi Mai Yawa, tex | 300 | 200 400 | 600 735 | 1100 1200 | 2200 | 2400 4800 | 9600 |
| Sigogi na Fasaha | |||
| Yawan Layi (%) | Yawan Danshi (%) | Girman abun ciki (%) | Ƙarfin Karyewa (N/Tex) |
| ISO1889 | ISO3344 | ISO1887 | IS03341 |
| ±5 | ≤0.10 | 0.55±0.15 | ≥0.40 |
Tsarin Naɗe Filament
Naɗaɗɗen Filament na Gargajiya
A cikin tsarin naɗe filament, ana ɗaure zare na fiberglass mai ci gaba da aka sanya resin a ƙarƙashin matsin lamba a kan mandrel a cikin tsare-tsare na geometric daidai don gina ɓangaren da aka warke don samar da sassan da aka gama.
Ci gaba da naɗewa da filament
Ana shafa layukan laminate da yawa, waɗanda suka ƙunshi resin, gilashin ƙarfafawa da sauran kayayyaki a kan mandrel mai juyawa, wanda aka samar daga madaurin ƙarfe mai ci gaba yana tafiya a cikin motsi na sukurori. Ana dumama ɓangaren haɗin kuma ana warkewa a wurinsa yayin da mandrel ɗin ke tafiya ta cikin layin sannan a yanke shi zuwa wani takamaiman tsayi da zare mai tafiya.
