-
Madaurin Triaxial Mai Tsawon Triaxial (0° + 45° - 45°)
1. Ana iya dinka layuka uku na roving, duk da haka, ana iya ƙara wani yanki na zare (0g/㎡-500g/㎡) ko kayan haɗin gwiwa.
2. Matsakaicin faɗin zai iya zama inci 100.
3. Ana amfani da shi a cikin ruwan wukake na injinan samar da wutar lantarki ta iska, kera jiragen ruwa da kuma shawarwari kan wasanni. -
Gilashin E-gilashi Taru Panel Roving
1. Domin ci gaba da gyare-gyaren panel, ana shafa shi da girman silane wanda ya dace da polyester mara cika.
2. Yana bayar da nauyi mai sauƙi, ƙarfi mai yawa da ƙarfin tasiri mai yawa,
kuma an ƙera shi ne don ƙera bangarori masu haske da tabarmi don allunan haske. -
Gilashin E-gilashi An Haɗa Don Fesawa
1. Kyakkyawan aiki don fesawa,
Matsakaicin saurin fitar da ruwa,
Sauƙin aiwatarwa,
Sauƙin cire kumfa,
Babu maɓuɓɓugar ruwa a kusurwoyi masu kaifi,
.Kyawawan halayen injiniya
2. Juriyar Hydrolytic a sassa, ya dace da tsarin fesawa mai sauri tare da robots -
Yadi mai siffar Biaxial +45°-45°
1. An daidaita layuka biyu na rovings (450g/㎡-850g/㎡) a +45°/-45°
2. Tare da ko ba tare da wani yanki na zare da aka yanka ba(0g/㎡-500g/㎡).
3. Matsakaicin faɗin inci 100.
4. Ana amfani da shi wajen kera jiragen ruwa. -
Gilashin E-gilashi An Haɗa Don Nada Filament
1. An ƙera shi musamman don tsarin naɗa filament na FRP, wanda ya dace da polyester mara cika.
2. Samfurin haɗin gwiwa na ƙarshe yana ba da kyakkyawan kayan aikin injiniya,
3. Ana amfani da shi galibi don ƙera tasoshin ajiya da bututu a masana'antar mai, sinadarai da hakar ma'adinai. -
Gilashin E-gilashi Taru Don SMC
1. An tsara shi don tsarin aji A da tsarin SMC.
2. An rufe shi da babban girman mahadi mai aiki wanda ya dace da resin polyester mara cikawa
da kuma resin vinyl ester.
3. Idan aka kwatanta da na'urar SMC ta gargajiya, tana iya samar da babban abun ciki na gilashi a cikin zanen SMC kuma tana da kyakkyawan yanayin danshi da kuma kyakkyawan yanayin saman.
4. Ana amfani da shi a cikin sassan mota, ƙofofi, kujeru, baho, da tankunan ruwa da na'urar wasanni -
Jirgin Ruwa Kai Tsaye Don LFT
1. An shafa shi da silane mai girman da ya dace da PA, PBT, PET, PP, ABS, PPS da POM resins.
2. Ana amfani da shi sosai a masana'antu na kera motoci, lantarki, kayan aiki na gida, gini & gini, lantarki & lantarki, da kuma sararin samaniya. -
Jirgin Ruwa Kai Tsaye Don CFRT
Ana amfani da shi don tsarin CFRT.
An cire zaren fiberglass daga waje daga bobbins ɗin da ke kan shiryayye sannan aka shirya su a hanya ɗaya;
An wargaza zare ta hanyar tashin hankali kuma an dumama su da iska mai zafi ko IR;
An samar da sinadarin thermoplastic mai narkewa ta hanyar extruder kuma an sanya masa fiberglass ɗin ta hanyar matsi;
Bayan sanyaya, an samar da takardar CFRT ta ƙarshe. -
3D FRP Panel tare da resin
Yadin da aka saka na Fiberglass mai siffar 3D zai iya haɗawa da resins daban-daban (polyester, epoxy, phenolic da sauransu), sannan samfurin ƙarshe shine kwamitin haɗa 3D. -
Maƙallin Foda na Fiberglass da aka Yanka
1. An yi shi ne da zare da aka yanka da aka raba bazuwar da aka haɗa ta hanyar manne foda.
2. Ya dace da resins na UP, VE, EP, da PF.
3. Faɗin birgima yana daga 50mm zuwa 3300mm. -
Takardar FRP
An yi shi ne da robobi masu daidaita yanayin zafi da kuma zare mai ƙarfi na gilashi, kuma ƙarfinsa ya fi na ƙarfe da aluminum ƙarfi.
Samfurin ba zai samar da nakasa da tsagewa a yanayin zafi mai tsanani da ƙarancin zafi ba, kuma ƙarfinsa na zafi yana da ƙasa. Hakanan yana da juriya ga tsufa, rawaya, tsatsa, gogayya kuma yana da sauƙin tsaftacewa. -
Tabarmar Allura ta Fiberglass
1. Fa'idodin juriyar zafin jiki mai yawa, juriyar tsatsa, kwanciyar hankali mai girma, ƙarancin raguwar tsayi da ƙarfi mai yawa,
2. An yi shi da zare ɗaya, tsarin ƙananan ramuka uku, babban rami, ƙarancin juriya ga tace iskar gas. Kayan tacewa ne mai saurin gudu, mai inganci mai zafi.
